Renaming programs
You can individually rename programs
"Prog 1" to "Prog 3". The designation
is limited to 5 characters.
01. Open the flap.
02. Press
twice.
03. With / select "Settings".
04. Confirm with OK.
05. With / select "Programs".
06. Confirm with OK.
Temperature adjustment
The displayed room temperature can
deviate from the actual room tempera-
ture if your Vitotrol 100 is installed in an
unfavourable position, e.g. on an exter-
nal wall or near a chimney. You can cor-
rect this temperature deviation with an
adjustment.
Example:
The room temperature displayed by the
Vitotrol 100 is 2 ºC higher than the actual
room temperature. The correction is then
−2 ºC.
1. Open the flap.
2. Press
twice.
Further adjustments
07. Use / to select the program you
want to rename (e.g. "Prog 1").
08. Confirm twice with OK.
09. With / select "Rename".
10. Confirm with OK.
11. With / enter the required charac-
ters on line "New name".
12. Confirm respectively with OK.
3. With / select "Settings".
4. Confirm with OK.
5. With / select "Service".
6. Confirm with OK.
7. With OK select the required value to
be set for "Ctrller offset".
8. With / set the required value.
9. Confirm with OK.
10. Exit the menu with
.
25