Renaming Programs; Temperature Adjustment - Viessmann VITOTROL 100 Operating Instructions For The System User

Renaming programs

You can individually rename programs
"Prog 1" to "Prog 3". The designation
is limited to 5 characters.
01. Open the flap.
02. Press twice.
03. With / select "Settings".
04. Confirm with OK.
05. With / select "Programs".
06. Confirm with OK.

Temperature adjustment

The displayed room temperature can
deviate from the actual room tempera-
ture if your Vitotrol 100 is installed in an
unfavourable position, e.g. on an exter-
nal wall or near a chimney. You can
correct this temperature deviation with
an adjustment.
Example:
The room temperature displayed by the
Vitotrol 100 is 2 ºC higher than the
actual room temperature. The correc-
tion is then −2 ºC.
01. Open the flap.
02. Press twice.
Further adjustments
07. Use / to select the program you
want to rename (e.g. "Prog 1").
08. Confirm 2 times with OK.
09. With / select "Rename".
10. Confirm with OK.
11. With / enter the required charac-
ters on line "New name".
12. Confirm respectively with OK.
03. With / select "Settings".
04. Confirm with OK.
05. With / select "Service".
06. Confirm with OK.
07. With OK select the required value
to be set for "Ctrller offset".
08. With / set the required value.
09. Confirm with OK.
10. Exit the menu with .
25