Cable Configuration; Vt 200 Or 300 Series - Cabletron Systems NB30 User Manual

Transmission
Keyboard Repeat Rate
N-key Rollover
Margin Bell Volume
Key Click Volume
Scroll
Speed
Kybd
Char
Menu
Online/Local
Host Stop Bits
Aux Stop Bits
Host Baud Rate
Host Parity
Aux Baud Rate
Aux Parity
2.2

CABLE CONFIGURATION

Local Management is accessed by an RS232 cable available from
Cabletron Systems. This cable connects the terminal to the bridge's
Console port.
The pin out for a cable with a 25 pin or a 9 pin connector at the terminal
end of the cable, and a 9 pin connector at the bridge end of the cable,
should be configured as shown in Section 2.2.1 or 2.2.2.
2.2.1

VT 200 or 300 Series

9 Pin Male Connector
(Bridge End)
Pin 3 (Receive)
Pin 2 (Transmit)
Pin 5 (Ground)
Pin 7 (Request to Send)
Pin 8 (Clear to Send)
CHAR
any option
any option
OFF
any option
any option (hard is preferred)
any option
U.S.
U.S.
English
ONLINE
1
any option
9600
8-bit none, 7-bit space
any option
any option
to 25 Pin Female Connector
(Terminal End)
to Pin 2 (Transmit)
to Pin 3 (Receive)
to Pin 7 (Ground)
to Pin 5 (Clear to Send)
to Pin 20 (Data Terminal Ready)
GETTING STARTED
2-3