Pinouts For The E1 Interface Connector; E1 Cable Assembly - Cabletron Systems SWPIM-E1 Installation Manual

Appendix A: Specifications
A.2.1

Pinouts for the E1 Interface Connector

The network interface pin assignments for the network connector are
listed in Table A-1.
Table A-1 Pinouts for the E1 Interface Connection
A.3

E1 CABLE ASSEMBLY

Table A-2 lists Cabletron Systems part numbers for the interface cables
for the SWPIM-E1. A standard 20-foot cable is available or the customer
may specify the length of cable when ordering.
Interface Cable
20-foot E1 Line Interface Cable
E1 Line Interface Cable
1. Standard 20-foot E1 Line Interface Cable.
2. (L denotes length required in feet or meters). For example: 9372095-3
denotes a 3-foot cable; 9372095-3M denotes a 3-meter cable.
A-2
Pin
1
2
3
4
5
6
7
8
Table A-2 SWPIM-E1 Cable Part Numbers
Signal
Receive Ring
Receive Tip
Shield Ground
Transmit Ring
Transmit Tip
Shield Ground
Shield Ground
Shield Ground
Cabletron Part Number
1
9372095-20
2
9372095-L
SWPIM-E1 Installation Guide