Maytag Commercial MDG20MNBGW Installation Instructions Manual page 26

Code Explanation
7. 00 SPECIAL PRICE START HOUR
NOTE: Uses military time or 24 hr. clock.
7. 00 This is the start hour; 0–23 hours.
• Select START HOUR by pressing the HEAVY DUTY
button.
• Press the NORMAL button once to advance to
next code.
8. 00 SPECIAL PRICE STOP HOUR
NOTE: Uses military time or 24 hr. clock.
8. 00 This is the stop hour; 0–23 hours.
• Select STOP HOUR by pressing the HEAVY DUTY
button.
• Press the NORMAL button once to advance to
next code.
9. 10 SPECIAL PRICE DAY
9. 10 This represents the day of the week and whether
special pricing is selected for that day. A number
followed by "0" indicates no selection that particular
day (9.10). A number followed by an "S" indicates
selected for that day (9.1S). Days of the week (1–7) are
selected by pressing the HEAVY DUTY button. Press
the DELICATES button once to select special pricing for
each day chosen.
When exiting set-up code "9," the display must show the
current day of week:
DISPLAY DAY OF WEEK
10 Day 1 = Sunday
20 Day 2 = Monday
30 Day 3 = Tuesday
40 Day 4 = Wednesday
50 Day 5 = Thursday
60 Day 6 = Friday
70 Day 7 = Saturday
• Press the NORMAL button once to advance to
next code.
A. 00 VAULT VIEWING OPTION
This option is either NOT SELECTED "OFF" or
SELECTED "ON."
A. 00 Not Selected "OFF."
A. SC Selected "ON."
• Press the DELICATES button once to change this
selection. When selected, the money and/or cycle
counts will be viewable (if counter option(s) is
selected) when the coin box is removed.
• Press the NORMAL button once to advance to
next code.
26
ELECTRONIC CONTROL SETUP INSTRUCTIONS
CODE (selected)
1S
2S
3S
4S
5S
6S
7S
(PD & PN/PR MODELS ONLY)
Code Explanation
b. 05 VALUE OF COIN 1
b. 05 This represents the value of coin 1 in number of
nickels: 05 = $0.25.
• By pressing the HEAVY DUTY button, there is an
option of 1–199 nickels.
• Press the NORMAL button once to advance to
next code.
C. 20 VALUE OF COIN 2/VALUE OF DRYER TOP OFF
C. 20 This represents the value of coin 2 in number of
nickels: 20 = $1.00.
For models using Enhanced Debit, this field represents
the value of top off in nickels.
• By pressing the HEAVY DUTY button, there is an
option of 1–199 nickels.
• Press the NORMAL button once to advance to
next code.
d.00 COIN SLIDE OPTION
This option is either NOT SELECTED "OFF" or
SELECTED "ON."
d.00 Not Selected "OFF."
d.CS Selected "ON."
• Press the DELICATES button 3 consecutive times
for this selection. When coin slide mode is selected,
set "b." equal to value of slide in nickels. Set "606"
(REGULAR CYCLE PRICE) and "3.06" (SPECIAL
CYCLE PRICE) to number of slide operations.
NOTE: If the installer sets up "CS" on a coin drop
model, it will not register coins.
• Press the NORMAL button once to advance to
next code.
E. 00 ADD COINS OPTION
This option is either NOT SELECTED "OFF" or
SELECTED "ON." This option causes the customer
display to show the number of coins (coin 1) to enter,
rather than the dollars-and-cents amount. The number
in the display changes as the coins are accepted.
E. 00 Not Selected "OFF."
E. AC Selected "ON."
• Press the DELICATES button 3 consecutive times
to change this selection.
• Press the NORMAL button once to advance to
next code.