Set A Call Block Number; Change The Call Block Pin; Auto Prefix - Motorola CD4001 User Manual

7.2.3

Set a call block number

M
1. Press , scroll
d
2. Scroll to Call
3. Enter the master PIN (default setting 0000) and press
d
Blacklist
4. Scroll to
d
5. Scroll to Block number
6. If necessary, scroll u or d to the next available slot.
M
7. Press and enter the number you want to block. Press
Note
When you are storing an phone number in the Blacklist, you will need to store the
full number including the dialling code for the number to be blocked.
If you want to change/delete the blacklist number follow the first 5 steps in 7.2.3
above, and then scroll to the slot where the number is stored and press
the number by pressing
new number and press
7.2.4

Change the Call block PIN

M
1. Press , scroll
d
2. Scroll to Call
3. Enter the master PIN (default setting 0000) and press
d
Change
4. Scroll to
5. Enter the old PIN and press
6. Using the keypad enter the new PIN and press
7. Re-type the new PIN and press
7.3

Auto prefix

You can set the phone to detect a dialling number and replace it with another
number. The number to be detected can be up to 5 digits long. It can be replaced
with a number up to 10 digits.
M
1. Press , scroll
d
2. Scroll to Auto
3. Detect digit is displayed. Press
4. Enter the number you want to be detected and press
5. The display shows Prefix, press
6. Enter the number you want it replaced with.
M
7. Press to confirm or
26
d
to Advanced Set
M
block, press .
M
and press .
and press
b
M
and either press
to save.
d
Advanced Set
to
M
block, press .
M
PIN. Press
.
M
.
M
d
Advanced Set
to
M
prefix, press .
M
M
e
to return to standby.
M
and press .
M
.
M
to save no number or enter the
M
and press .
M
.
.
M
and press .
.
.
M
.
M
to confirm.
M
. Delete
M
.
M
.
Advanced settings