Call Block; Switch Anonymous Call On/Off; Switch Block Mode On/Off; Set A Call Block Number - Motorola T6 Series Manual

5. Call block

You can set the phone so that when certain phone numbers call the phone
does not ring.
For this feature to work, you must subscribe to Caller ID Service from your
network operator. A subscription fee may be payable.
You can go to Call block
pressing the dedicated
5.1

Switch anonymous call on/off

You can also set the phone so that any call that shows Private, Anonymous,
Unavailable or Out of Area will not ring.
M
1. Press , scroll
d
2. Scroll to Call
Anonymous call
3.
M
i
4. Press , or
5.2

Switch block mode on/off

You can set the phone so that when phone numbers added to the blacklist call,
the phone does not ring. Up to 100 numbers can be added to the blacklist.
M
1. Press , scroll
d
2. Scroll to Blacklist
3. Block mode is displayed.
M
i
4. Press , or
5.3

Set a call block number

M
1. Press , scroll
d
Blacklist
2. Scroll to
d
3. Scroll to Block number
d Add new
4. Scroll to
5. Enter the number you want to block. Press
Note
When you are storing an phone number in the Blacklist, you will need to store
the full number including the dialling code for the number to be blocked.
If you want to change/delete the blacklist number follow the first 3 steps in
5.3 above, and then scroll to the slot where the number is stored and press
Delete the number by pressing
enter the new number and press
Call block
through the handset menu as described below, or by
key on the handset.
B
d Call block
to and press
M
block, press .
is displayed.
d
On
to select or
d Call block
to and press
M
and press
d On
to select or
d Call block
to and press
M
and press
and press
M
and press
M
and either press
u
M
.
M
Off
and press
M
.
.
M
Off
and press
M
.
.
M
.
.
M
to confirm.
M
to save.
to confirm.
to confirm.
to save no number or
M
.
23