Important Safety Information - Youcan Robot BW Space User Manual

VI Important Safety Information
1.Before using this product, please read all safety information first to ensure
correct and safe use.
2.Before unlocking the tether, make sure the peripheral area of the interface is
dry to avoid short circuit.
3.Youcan Robot will upgrade the BW Space camera system from time to time.
During the upgrade, remember not to disconnect the device, and you cannot
exit Youcan Dive midway until the upgrade is over. Otherwise, BW Space may
be permanently unavailable.
After the upgrade is complete, it may take 1 to 2 minutes for the camera to
work properly again.
4.Before BW Space is placed in the water, make sure the tether is securely
connected to avoid short circuit or loss.
5.Do not put the WiFi Repeater into the water.
6.Please use this product in the 0-40 °C temperature.
7.Seawater is corrosive. After using in seawater, please remember to rinse
the drone with fresh water to extend the service life of the propeller and the
machine.
8.If encountering sudden power failure, rope breakage or other emergencies in
the course of using, BW Space will automatically float to the surface through
its own buoyancy.
9.The lens is fragile, do not deliberately hit, beat, or damage the lens.
10.Do not use the drone in the aquatic environment where there is too much
water plants lest the propeller be winded.
11.Do not intensely hit, squeeze, beat, knock or burn the product and its
accessories.
12.Minors shall use products or accessories accompanied by their parents to get
away from potential safety hazards.
13.Do not use this product to photograph others or photograph private areas
without permission. Don't use this product for reconnaissance, spying, or
military activities if not permitted.
33