Youcan Robot BW Space User Manual page 12

3.Open Youcan Dive App, select "Enter" or "Log in" (New users can register
and log in ), click "Connect the WiFi" (Search for and select the WiFi signal
starting with Youcan-xxxx and enter the initial password 12345678), after
successfully connected, please click "Connect", and just wait for the system to
automatically complete device search and sensor status check, then slide to the
right to unlock and BW Space is ready for operation and shooting.
Important tips:
Control system upgrade: To continuously optimize the operative
performance of BW Space, we will upgrade the control system of BW Space
from time to time. When you open Youcan Dive APP, if the screen center slider
prompts display the progression of upgrading, this indicates that the device or
software is being upgraded, usually for a duration of about 1 minute. Do not
quit from the upgrading. In case of failed upgrading, please exit the Youcan
Dive, unplug the tether and reconnect and restart the upgrading.
Camera upgrade: Youcan Robot will upgrade the BW Space camera system
from time to time. If a prompt pops up and requires a camera to upgrade
when you enter Youcan Dive APP, BW Space will start downloading the latest
camera system and upgrade it upon the user's confirmation. This process may
take about 5 minutes. Please do not disconnect the device and keep Youcan
Dive under operation in the upgrade.
When you first use the BW Space underwater drone, you will be prompted
for depth calibration and machine calibration.
Note: When you are performing depth calibration and machine calibration, the
drone's light will always blink, which is normal.
07