Youcan Robot BW Space User Manual page 23

Image stabilizer: The default is off. When turned on, the stability of the
picture will be significantly enhanced when the drone is shaken violently, but
the frame will shrink as it is cropped.
Exposure: Set the gain of the image signal, divided into auto gain and manual
gain.
Auto Gain: Automatically magnifies the image signal to increase the sensitivity
of the image in low light conditions. Set a maximum value for the gain by
the upper gain limit, and ensure that the automatic gain is not higher than this
value. The setting range is 1-100. It is recommended to use the default value.
Too high a gain will increase image noise and reduce image quality.
Manual Gain: Manually set the gain level. It is recommended to use the default
value.
White balance: Adjust the color temperature of videos and photos.
When the lock white balance is enabled, the camera's white balance does not
adjust to changes in the environment.
Image stabilizer
Exposure
Gain
Gain upper threshold
White balance
Night cut
Image enhancement
2D Noise Redution Mode
2D Noise Redution
Dynamic Adjustment
Image enhance
Auto Gain
70
Open
70
Close
Close
18