Youcan Robot BW Space User Manual page 32

Remote Controller Function
Power On/Off: Power On—Shortly press the power button first, then long
press it again until the indicator light turns green, you will hear the sound
of beep, meaning that the controller is turned on successfully.
Power off—shortly press the power button first, then long press it again
until the indicator light turns off—meaning that the controller is turned off
successfully.
Photo: Tap the Photo button to take photos.
A
Record: Click the Record button to start recording. Click the Record
B
button again to stop recording.
Depth maintenance: Click the button, turn on the depth maintenance
C
shooting function; tap the button again, turn off the depth maintenance
shooting function.
Image Stabilization: Click the button to turn on image stabilization ; Click
D
again to turn off image stabilization.
Control Mode: When E, F in the default position ( in the middle) , Control
E . F
mode 1 is selected.
When both are up, Control mode 2 is selected.
When both are go down, Control mode 3 is selected.
When one is up, another is down: Control mode 4 is selected.
Speed: Left: Low speed. Middle: Medium speed. Right: High speed.
H
Note: All buttons are not valid without a machine connected. After
connecting to the machine, you need to toggle or press buttons again to
activate above-mentioned functions.
27
B
A
D
C