ERROR MESSAGE
Fiber Over Angle
It is displayed when the measured
cleaving angle of the fiber is greater
than the limit.
HOW TO
· Reset the fiber after checking the
condition of the cleaver.
· Check the value of the cleaving angle.
Fiber Is Not Placed In V-Groove.
Please Place The Fiber Again.
It is displayed when the fiber is not
placed on the V-Groove.
HOW TO
· Place the fiber again.
The Variation Of The
Optical Fiber Core.
To Cut Back The Fiber.
It is displayed when the measured variation of
the fiber length is greater than the limit.
HOW TO
·Reset the fiber after checking the condition of
the cleaver.
· Check the value of the variation.
��