Cleaving The Fiber - UCL SWIFT SWIFT KR12 User Manual

OPERATION
CLEAVING
THE FIBER
� Place the stripped fiber on the V-groove of the cleaver and
check the length to cleave the fiber. Separate the each fiber
when using the ribbon fiber. If the each fiber is not separated,
it can make the problem on the cleaving.
� Pull down and press the cover to cleave the fiber.
� Lift the cutting lever and take the optical fiber out.
� Remove the fiber fragments and dispose it
in a proper container.
Please read user manual of the cleaver for more
detailed information about the operation of the cleaver.
LOAD THE FIBER
TO SWIFT KR��
� Open the windshield cover and optical fiber.
Insert the fiber holder on the Swift KR��.
� Make sure that the tip of the prepared fiber does not
contact other object.
� Place the other fiber in the same way as directed above.
� Close the windshield cover carefully.
To reduce align time : place the fiber properly.
Place the each fiber on the V-Groove property
when using the ribbon fiber.
��