Q & A
SLEEVE HEATER
The sleeve heater does not give sufficient shrinkage.
HOW TO
·Increase the duration of heating time.
Refer to [Heat Menu] for more information.
The sleeve heater is overheated.
HOW TO
· Stop the operation of the heater by pressing
Turn off the power and contact UCLSWIFT Co., Ltd.
· When the sleeve is not separated from the heating plate,
use a cotton swab or a similar object to this to push or
remove the sleeve.
How to initialize the heating condition in the heat mode?
HOW TO
· Refer to [Heat Menu] for more information.
How to cancel the heating process?
HOW TO
· You cannot cancel the heating process by pressing
Press
.
HEAT
one more time to cancel it
HEAT
.
RESET
��