Table of Contents
Advertisement
System Setup
2.2
Hardware Setup
This section provides the overall system setup for the EVM. The hardware setup contains the MSP-
EXP432E401Y launchpad and the BP-DAC11001EVM. A PC runs the software that provides an interface
to the BP-DAC11001EVM through the launchpad.
The BP-DAC11001EVM requires external power supplies, as described later in this document. The 3.3-V
and 5-V power supplies from the launchpad can be used for IOVDD and DVDD for the DAC, respectively,
using jumper options. The launchpad generates the digital signals used to communicate with the EVM
board.
Figure 5
displays the hardware setup.
6
BP-DAC11001EVM
Figure 5. Hardware Setup
Copyright © 2019, Texas Instruments Incorporated
www.ti.com
SLAU806 – October 2019
Submit Documentation Feedback
Advertisement
Table of Contents
