Table of Contents
Advertisement
Detailed Description
3.2
Software Description
This section describes the features of the BP-DAC11001EVM software, and discusses how to use these
features. The software provides basic control of all the registers and functions of the DAC11001 device.
3.2.1
Starting the Software
To launch the software, locate the Texas Instruments folder in the All Programs menu, and select the BP-
DAC11001EVM icon, as shown in
Figure 9
shows that if the launchpad connector is connected correctly, the status bar at the bottom of the
screen displays Hardware Connected. If the launchpad is not properly connected or not connected at all,
the status bar displays Hardware not connected. In case the Hardware not connected status persists even
after the hardware is connected, go to Options → Serial Port, and change the port to the other available
port with the (Texas Instruments) or ACCtrl tag. One of the two ports with these tags will connect to the
hardware.
10
BP-DAC11001EVM
Figure
8.
Figure 8. BP-DAC11001EVM GUI Location
Figure 9. GUI Connection Detection
Copyright © 2019, Texas Instruments Incorporated
www.ti.com
SLAU806 – October 2019
Submit Documentation Feedback
Advertisement
Table of Contents
