Hard Drive Carrier Indicators - Supermicro A+ Server AS -2014TP-HTR User Manual

A+ Server AS -2014TP-HTR User's Manual
Installing the Hard Drive
1. Install a new drive into the carrier with the printed circuit board side facing down so that
the mounting holes align with those in the carrier.
2. Secure the hard drive by tightening all six screws.
3. Use the open handle to replace the drive tray into the chassis. Make sure to close the
drive tray handle.
2
Drive Tray
Note: Enterprise level hard disk drives are recommended for use in Supermicro chassis and
servers. For information on recommended HDDs, visit the Supermicro website at
supermicro.com/support/resources/HDD/systemHDD.cfm?ProductID=86917.

Hard Drive Carrier Indicators

Each hard drive carrier has an activity LED indicator. See below for the LED description.
LED Color State
Activity LED Blue
Blue
Hard Drive
Figure 3-9. Installing the Hard Drive
Solid On
Blinking
44
2
Status
SATA drive installed
I/O activity
https://www.