Table of Contents
Advertisement
TPM Header/Port 80 Connector
The JTPM1 header is used to connect a Trusted Platform Module (TPM), which is available from
a third-party vendor. A TPM is a security device that supports encryption and authentication in
hard drives. It enables the motherboard to deny access if the TPM associated with the hard
drive is not installed in the system.
Please go to the following link for more information on TPM:
manuals/other/TPM.pdf.
Pin#
1
3
5
7
9
11
13
15
17
19
PCI-E M.2 Connectors
The PCI-E M.2 connectors (M.2-HC1 to M.2-HC4) are for devices such as memory cards,
wireless adapters, etc. These devices must conform to the PCI-E M.2 specifications (formerly
known as NGFF). This particular PCI-E M.2 supports M-Key (PCI-E x4 or SATA) storage card.
USB 3
The internal USB3 (USB 2.0) Type-A connector provides an internal access port with extensive
USB devices, as well as USB DOM.
Trusted Platform Module Header
Pin Definitions
Definition
Pin#
LCLK
2
LFRAME#
4
LRESET#
6
LAD3
8
3.3V
10
LAD0
12
SMB_CLK (optional)
14
P3V3_STBY
16
GND
18
LPC_PD (optional)
20
USB3 (2.0)
Pin Definitions
Pin#
Definition
1
+5V
2
D-
3
D+
4
Ground
57
Chapter 4: Motherboard Connections
http://www.supermicro.com/
Definition
GND
Key
N/C
LAD2
LAD1
GND
SMB_DAT (optional)
SERIRQ
LP_CLKRUN (optional)
LPC_DRQ (optional)
Advertisement
Table of Contents
