Supermicro A+ Server AS -2014TP-HTR User Manual page 12

A+ Server AS -2014TP-HTR User's Manual
Item Feature
1 Power Button
2 NIC1 LED
3 Information LED
4 UID Button
Status
Continuously on and red
Blinking red (1 Hz)
Blinking red (0.25 Hz)
Solid blue
Blinking blue (300 Msec)
Control Panel Features
Description
The main power button on each of the control panels is used to apply or
remove power from the power supply to the associated node. Turning power
to the system off with this button removes the main power, but keeps standby
power supplied to the system. The power button has a built-in LED which will
turn green when the power is on.
This LED indicates network activity on either LAN1 or LAN2 when flashing.
See the following table for the status shown by this LED.
The UID button is used to turn on or off the blue light function of the LED. This
light is displayed in the front as part of the UID button and with a separate
LED at the rear of the node. The light helps locate the node in large racks and
server banks.
Information LED
Description
An overheat condition has occurred. (This may be caused by cable congestion.)
Fan failure: check for an inoperative fan.
Power failure: check for an inoperative power supply.
Local UID has been activated. Use this function to locate the server in a rack
environment.
Remote UID has been activated. Use this function to locate the server from a
remote location.
12