Poe Connection - ABB Ability Cassia X1000 Installation Manual

2.4

PoE connection

If a PoE (Power Over Ethernet) network is available, the gateway can be configured to use
it without any additional power supply.
From the Gateway Basic Page select:
Connection Priority: Wired
-
IP Allocation: DHCP or Static (in case the IP address is given)
-
Press Apply at the bottom of the screen.
DOCUMENT ID
9AKK107046A4620
© Copyright 2021 ABB. All rights reserved.
Figure 8 PoE network configuration
REV.
K
AB B ABI LIT Y™ SM ART S ENSO R BLU ETOOTH ® G AT EWAY
DATE
November 2021
LANG. PAGE
EN 13/23