Operating Instructions and Parts Manual
SPECIFICATIONS
POWER SUPPLY REQUIREMENTS
MOTOR
HORSEPOWER
LIQUID TEMPERATURE
CIRCUIT REQUIREMENT
DIMENSIONS
ON LEVEL (FACTORY SET)
OFF LEVEL (FACTORY SET)
CONSTRUCTION
MOTOR HOUSING
Cast Iron (ALL MODELS)
VOLUTE
Cast Iron (ALL MODELS)
IMPELLER
Glass Reinforced Thermoplastic (T50SW,
F50SW)
Cast Iron (200SW, 100SW, 75SW)
SHAFT
Steel
DISCHARGE
2 in. NPT (T50SW, F50SW)
3 in. NPT supplied 2 in. Adapter (200SW,
100SW, 75SW)
PERFORMANCE
Model
HP Discharge Head
T50SW
1/2
Gal / hr
F50SW
1/2
Gal / hr
PERFORMANCE
Model
HP Discharge Head 15 ft
200SW
2
Gal / hr
100SW
1
Gal / hr
75SW
3/4
Gal / hr
© 2018, Blue Angel/Scott Fetzer Company
120 V, 60 Hz (T50SW, F50SW)
230 V, 60 Hz (200SW, 100SW, 75SW)
Single Phase, Dielectric Oil Filled (T50SW, F50SW)
Permanent Split Capacitor (200SW, 100SW, 75SW)
2 HP...............(200SW)
1 HP...............(100SW)
3/4 HP..........(75SW)
1/2 HP..........(T50SW, F50SW)
40° F - 120° F
15 A (minimum)
16-5/8 in. high x 9-5/8 in. base (T50SW)
17 in. high x 10-5/8 in. base (F50SW)
18 in. high x 11 in. base (200SW, 100SW, 75SW)
Approximately 19. in. (T50SW)
Approximately 13 in. (F50SW)
Approximately 10-1/2 in. (T50SW)
Approximately 8 in. (F50SW)
5 ft
10 ft
15 ft
20 ft
7680
6600
1920
-
7680
6600
1920
-
20 ft
25 ft
30 ft
-
-
9600
6400
-
9800
6300
3400
-
6700
3400
1400
Please read and save these instructions. Read carefully before attempting to assemble, install,
operate or maintain the product described. Protect yourself and others by observing all safety
information. Failure to comply with instructions could result in personal injury and/or property
damage! Retain instructions for future reference.
35 ft
40 ft
4000
2300
1300
-
-
-
Intended for Indoor Use Only
www.blueangelpumps.com
Sewage Pump
Sewage
T50SW (Tether Float Switch)
F50SW (Vertical Float Switch)
200SW, 100SW, 75SW
* THE PERFORMANCE FOR MODELS
200SW, 100SW, AND 75SW, WHERE
THE SPACES ARE EMPTY THESE
PUMPS SHOULD NOT BE USED AT
THAT LIFT.
610001-026 B 08/18