Wayne FloodAlert 370700-001 Operating And Parts Manual

Operating Instructions and Parts Manual
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Description
a Flood alert™ Wireless Sump Pump
Monitoring System is designed to notify
the home owner of an immediate
problem in the sump pit. an alarm will
sound and a light will flash indicating
that the water level has risen within the
sump pit, and could potentially overflow.
unpacking
after unpacking the unit, carefully
inspect for any damage that may have
occurred during transit. Check for
loose, missing or damaged parts.
The packaging includes:
• 3V Lithium battery
• Transmitter
• Float switch assembly
• Receiver
• Transformer
• Float switch bracket
• 3 Zip ties
• Clip
Safety Guidelines
This manual contains information that is
very important to know and understand.
This information is provided for SaFeTy
and to PREVENT EQUIPMENT PROBLEMS.
To help recognize this information,
observe the following:
Danger indicates an
imminently
hazardous situation which, if not avoided,
WILL result in death or serious injury.
Warning indicates a
potentially
hazardous situation which, if not avoided,
COULD result in death or serious injury.
Caution indicates a
potentially minor
or moderate injury.
Notice indicates
important
information, that if not followed, may
cause damage to equipment.
REMINDER: Keep your dated proof of purchase for warranty purposes!
© 2010 Wayne Pumps
Pump Monitoring System

General Safety

Information
CAlIfORNIA PROPOSItION 65
contain chemicals known to the State
of California to cause cancer and birth
defects or other reproductive harm.
Wash hands after handling.
SAfEty GuIDElINES
Read these rules and instructions
carefully. Failure to follow these
instructions could cause serious bodily
injury and / or property damage.
qualified electrician. The pump must be
installed in compliance with all local
codes and the National Electrical Code.
READ & fOllOW All INStRuCtIONS
SAvE thESE INStRuCtIONS
DO NOt DISCARD
Attach it to this manual or file it for safekeeping.
For parts, product & service information
visit www.waynepumps.com
Wireless Sump
™
Installation
before attempting to install, service,
relocate or maintain the pump. Never
This product or
touch sump pump, pump motor, water or
discharge piping when pump is connected
its power cord may
to electrical power. Never handle a pump
or pump motor with wet hands or when
standing on wet or damp surface or in
water. Fatal electrical shock could occur.
1. Unplug the sump pump.
2. Loosen the top nut on the float switch.
3. Slide the nut out of the way on the
float switch wire (Fig. 1).
4. Slide the float switch into the
mounting bracket (Fig. 1).
All wiring must be
performed by a
figure 1 - Mounting float on bracket
WSA120
T E C H N O L O G Y
Always disconnect
the power source
1
2
370700-001 3/10