Enterasys Matrix 7G4270-09 Configuration Manual page 22

The QoS CLI Command Flow
Procedure 1 Class of Service CLI Configuration Command Summary (continued)
Step
8.
9.
February 22, 2008
Task
Modify a currently configured CoS or create a
new CoS. Verify the new CoS configuration. All
TxQ to port group mappings are associated with
the transmit queue reference. All IRL to port
group mappings are associated with the inbound
rate limiter reference.
Enable CoS state for the system. Verify the new
CoS state.
Command(s)
Matrix(su)->set cos settings index
priority priority tos-value tos
txq-reference reference
irl-reference reference
Matrix(su)->show cos settings
Matrix(su)->set cos state enable
Matrix(su)->show cos state
Page 22 of 29