Removing The Protective Material - Roland FJ-400 Unpacking, Assembly And Installation Manual

5 Removing the Protective Material

The protective material shown below is attached to the FJ-600/500/400 when it is shipped from the factory. When you have finished
installing the machine, remove all protective material.
Front
Rear
When you have finished unpacking, assembling, and installing the machine, connect the cables. For information about how to make the
connections, see "Making the Connections" in the User's Manual packed with the machine.
10
2) Pull straight back
toward you to extract.
4) Remove.
1) Peel off the tape.
3) Remove the retainer.
5) Attach the retainer you
removed in step 3.