Cabletron Systems CyberSWITCH CSX5500 Release Note page 5

User Management Features
User Based Network Protocol Enable/Disable
8 CLIDs / 8 TNs per User Entry
CCP per User
INSTALLATION AND CONFIGURATION NOTES:
In general, the CSX platform will be shipped to you pre-configured with this version of software. If you would like
to upgrade an existing CSX platform please follow these TFTP download instructions:
1. From your PC or workstation, Telnet to the CyberSWITCH and login as admin .
2. If you are upgrading from UAA 7.2 or 7.3 software, skip this step. If you are upgrading from a release prior to
UAA 7.2 software, you must first transfer the following files:
TFTP the file PKUNZIP.EXE to the \ admin directory of the CyberSWITCH.
TFTP the file RUGRADE.BAT to the \(root) directory.
TFTP the file AUTOEXEC.BAT to the \(root) directory.
3. TFTP the file UPGRADE.OSW to the CyberSWITCH's \(root) directory.
4. Telnet to the CyberSWITCH and issue the restart command.
SOFTWARE CHANGES AND ENHANCEMENTS:
NET5 D-Channel Callback
Modem Callback
V.90 Firmware
Modem Firmware revision reported on VER command
DMS500 phone switch support
CSX-Y2K-SW-UGK support
06/99 P/N: 9032577-02
F0615-C
Central Site CUSTOMER RELEASE NOTES
Subject to Change Without Notice
35 Industrial Way
PO Box 5005
Rochester, NH 03867-5005
(603) 332-9400
5
Page: