Reports Settings And Measurement Values - Viessmann MatriX Service Instructions For Contractors

Settings and measurement values
Static pressure
Supply pressure (flow pressure)
Natural gas E
=
Natural gas LL
=
Tick gas type.
Carbon dioxide content CO
At the upper rated heat-
■
ing output
At the lower rated heat-
■
ing output
Oxygen content O
2
At the upper rated heat-
■
ing output
At the lower rated heat-
■
ing output
Carbon monoxide con-
tent CO
Flue gas temperature
(gross)
Ionisation current
At the upper rated heat-
■
ing output
At the lower rated heat-
■
ing output
Draught
Note
The CO content must always be lower in partial load
2
than it is in full load.
mbar
kPa
mbar
kPa
mbar
kPa
2
Actual % by vol.
Set % by vol.
Actual % by vol.
Set % by vol.
Actual % by vol.
Set % by vol.
Actual % by vol.
Set % by vol.
Actual ppm
Set ppm
Actual °C
Set °C
A
μ
A
μ
Actual hPa
Set hPa
Commissioning Maintenance/Service
Reports
47