Standard Equipment And Specifications - Bush Hog DHP8 Operator's Manual

1. Standard Equipment and Specifications

DHP8
Hitch Type
------------------------------Pull-Type w/Clevis & Hole for 1-1/4" Pin------------------------------
Blade Spacing 7-1/2",9 or Combination
Blade Types Notched
Blade Size
20" or 22"
Transport Width 8' - 10'
Cultivation Width 8'-6"
Bearing Type
-------------------------------- Triple Lip Sealed Ball Bearings ------------------------------------
No. of Bearings 8
Mainframe Width 60"
Drawbar HP Req.
40-65 HP
Gang Tube 3"x1-1/2"
Gang Axle ------------------------------ 1-1/8" Square High Carbon Steel -----------------------------------
Parking Jack
Standard
Forward Gang ------------------------------ 15, 16.5, 18, 19.5, 21 Degrees --------------------------------------
Angle Adjustment
Rear Gang -------------------------------- 12, 13.5, 15, 16.5, 18 Degrees ------------------------------------
Angle Adjustment
Front to Rear ---------------------------------------Manual Crank Adjustment----------------------------------------
Leveling System
Depth Control ------------------------------------Cylinder Stroke Control Spacers-----------------------------------
Hydraulic Cylinder ------------------------------3-1/2" x 8" ASAE Hydraulic Cylinder------------------------------------
Transport Tires -------------------------Two 9.5L x 15 Tires on 15" x 6" - 5 Bolt Wheels--------------------------
and Wheels
AVAILABLE OPTIONS
Disc Scrapers, Center Sweep Kit, Dual Wheel Transport Kit
DHP8, DHP10, DHP12
© 2021 Alamo Group Inc.
OPERATION
DHP10
7-1/2",9 or Combination
Notched
20" or 22"
8' - 10'
10'-6"
12
93-1/2"
45-100 HP
3" x 2"
Standard
05/21 Operation Section 4-3
DHP12
7-1/2",9 or Combination
Notched
20" or 22"
8' - 10'
12'
12
93-1/2"
55-100 HP
4" x 3"
Standard