Table of Contents
Advertisement
MODEL
PG-300
PG-480
PG-600
PG-720
Figure 1 PG-720 Plugger
Greasable Shaft Sleeve
WARNING
DURING IMPLEMENT ADJUSTMENT
KEEP BODY, HANDS AND FEET CLEAR
OF SPOONS OR FRAME.
ATTACHMENT (Lift Type)
The implement should be placed on level ground.
Place the tractor rockshaft control in "position con-
trol" (non-floating) for attaching and detaching the
implement. "Draft control" or "position control" can
be used while operating.
All manuals and user guides at all-guides.com
SPECIFICATIONS
SIZE
TYPE HITCH
30"
Pull
48"
Lift
60"
Lift
72"
Lift
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Weight Rack
Lower Lift Point
Spoons
SECTION I
OPERATION
HUBS
SPOONS
4
32
6
48
8
64
10
80
Mast
Back the tractor until the ends of the lift arms can be
attached to the lift points on the implement. Secure
the lift arms to the mast. (Figure 1)
Attach the center link to the top of the mast and
adjust so that the frame will be level in the operating
position. Remove parking stand and store in the
upside down position.
DETACHING FROM TRACTOR
Pin parking stand into position and lower the imple-
ment to the ground with rockshaft control in position
control. Remove top link from mast, disconnect hitch
arms from bottom pins and pull tractor away from
implement.
6
APPROX. WT.
175 lbs.
290 lbs.
350 lbs.
390 lbs.
Top Link
Lift Point
Parking Strand
Advertisement
Table of Contents
