Specifications; I Operation; Attachment; Detaching From Tractor - Bush Hog MPG 600 Operator's Manual

MODEL
MPG-600
MPG-720
Figure 1 MPG 600 Plugger
Weight Rack
Greasable Shaft Sleeve
WARNING
DURING IMPLEMENT ADJUSTMENT
KEEP BODY, HANDS AND FEET CLEAR
OF SPOONS OR FRAME.

ATTACHMENT

The implement should be placed on level ground.
Place the tractor rockshaft control in "position con-
trol" (non-floating) for attaching and detaching the
implement. "Draft control" or "position control" can
be used while operating.
All manuals and user guides at all-guides.com

SPECIFICATIONS

SIZE TYPE HITCH
60" Lift
72" Lift
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Spoons
SECTION I
OPERATION
HUBS SPOONS
10 80
12 96
Top Link Lift Point
Lower Lift Points
Back the tractor until the ends of the lift arms can be
attached to the lift points on the implement. Secure
the lift arms to the lower lift points. (Figure 1)
Attach the center link to the top of the mast and
adjust so that the frame will be level in the operating
position. Remove parking stands and store in the
upside down position.

DETACHING FROM TRACTOR

Pin parking stands into position and lower the imple-
ment to the ground with rockshaft control in position
control. Remove top link from mast, disconnect hitch
arms from bottom pins and pull tractor away from
implement.
6
APPROX. WT.
460 lbs.
500 lbs.
Mast
Parking Strand