Viessmann VITOTROL 100 Operating Instructions For The System User page 23

Selecting the time program
Disabling time phases
To disable a time phase, set the same
value for the start and stop times.
Copying a time program
You can copy time programs, for exam-
ple to make a new time program from
another where only minor changes are
required.
01. Open the flap.
02. Press twice.
03. With / select "Settings".
04. Confirm with OK.
05. With / select "Programs".
06. Confirm with OK.
07. Select the program you want to
change with / (e.g. "Prog 1").
08. Confirm with OK.
09. Select "DHW" with / .
10. Confirm with OK.
11. With / select "Copy from".
12. Confirm with OK.
13. With / select the program you
want to copy.
14. Confirm with OK.
(cont.)
15. With / select "Set" to make
changes.
DHW heating
23