Changing The Address Code - Viessmann VITOTROL 100 Operating Instructions For The System User

Changing the batteries
Reset

Changing the address code

Wireless receiver on the boiler
A
8 Q ë r w
A LED
1. Press B on the wireless receiver
for approx. 10 s until LED r
flashes.
2. Open the flap of the Vitotrol 100.
(cont.)
Press the reset button with a suitable
instrument. After a reset, re-enter the
language, time and date.
3. Press
4. With / select "Settings".
5. Confirm with OK.
6. With / select "Service".
B
7. Confirm 3 times with OK.
8. With / select "Address code".
9. Confirm with OK.
Once the address code is recognised,
the LEDs go out; otherwise repeat the
process.
twice.
After approx. 30 s the display shows
"Transmitting".
The transmission takes approx.
30 s.
During the transmission, LED
flashes briefly.
What to do if...
31