Table of Contents
Advertisement
1. Description
CV-940 is a Wiegand biometric reader for indoors access
control applications. It offers storage of up to 9500
fingerprints and a programmable Wiegand Output
(8 to 128 bits).
Configuration of the readers and fingerprint enrollment
is done through PC Software. Connection between the
biometric readers is RS485 and it is used for fingerprint
transfer and configuration. When used with third party
controllers, the connection between the Biometric readers
and the PC is done through a RS485 converter. Only one
converter is needed per system (one converter for 1, 2,
3...30, 31 Biometric readers.
The tamper switch output can trigger the alarm system, if an
attempt is made to open or remove the unit from the wall.
2. Specifications
Fingerprint capacity
Technology
Authentication
Fingerprints per user
Interface
Protocol programming
Cable distance
Fingerprint Sensor Type
1:1000 identification time
Fingerprint enrolment
Panel Connection
Green and Red LED
Orange LED
Buzzer
Backlight ON/OFF
Tamper
Consumption
IP Rating
Power supply
Operating Temperature
Dimensions
Housing
Color
up to 9500 fingerprints
Biometry
Finger
1-10 fingerprints
Wiegand 8 to 128 bits; Default: Wiegand 26bit
By CAMS software (CV-350 system) and CBMS (all access control systems)
164 ft. (50m)
Capacitive
970 msec, including feature extraction time
On the reader or from the USB desktop reader (CV-350ER)
Cable, 3 ft. (1m)
Externally Controlled
Idle mode
Yes
Yes, by software settings
Yes
100mA
65
12V DC
5°F to +122°F (-15°C to 50°C)
3 5/8" W x 2" H x1" D (92mm x 51mm x 25mm)
Moulded Aluminium
Silver, Red, Charcoal, White
Page 3 of 19
CV-940 Series
Advertisement
Table of Contents
