Driver's Seat - PREVOST H3-41 Manual

Hide thumbs Also See for H3-41:
Table of Contents

Advertisement

FASTENING SAFETY BELT
Immediately report problems with safety belts to
maintenance personnel.
NOTE: The safety belt must be pulled out slowly
and steadily, otherwise the inertia reel will lock
before the latch plate reaches the buckle. If the
inertia reel locks, let the belt retract completely
before trying again.
WARNING:
TO PREVENT SERIOUS INJURY
DURING SUDDEN BRAKING OR ACCIDENTS,
MAKE SURE THE LAP BELT IS SNUG AND
POSITIONED LOW ON THE HIPS.
SURE THE BELT IS NOT TWISTED. CHECK
THE BELT AND BELT HARDWARE.
SHOULD BE FREE OF DAMAGE CAUSED BY
THE
SEAT
MECHANISM.
PROBLEMS
WITH
MAINTENANCE PERSONNEL.
CAUTION:
DO NOT LET THE BELT RUB
AGAINST EDGES. DO NOT BLEACH OR DRY
CLEAN.
To unfasten the safety belt, press the red button
in the center of the buckle and allow the belt to
retract. If the belt does not retract, pull it out and
check for kinks or twists. Make sure that the belt
remains untwisted as it retracts.
UNFASTING SAFETY BELT
OEH3B222
MAKE
REPORT
SAFETY
BELTS
TO
OEH3B218

Driver's Seat

The coach is equipped with a ISRI seat which is
offered in three models.
(model 6000) has mechanical suspension. The
optional models (models 6500 and 6801) are
equipped with air suspension. All seat models
come equipped with safety belts.
armrests and lumbar supports are also available.
WARNING:
ADJUSTED
CONTROLS.
WHILE THE COACH IS MOVING.
IT
WARNING:
MAKE SURE THE SEAT IS ADJUSTED AND
SAFETY BELT FASTENED BEFORE DRIVING.
DRIVER'S SEAT ADJUSTMENT
2-3
INTERIOR OF COACH
The standard model
THE DRIVER'S SEAT MUST BE
WITHIN
EASY
REACH
NEVER ADJUST THE SEAT
ALWAYS WEAR SAFETY BELT.
Adjustable
OF
OEH3B220

Advertisement

Table of Contents
loading

This manual is also suitable for:

H3-45

Table of Contents