Page 2
Components Upon unpacking your tall boy from it’s delivery box, you should have the separate pieces shown below. Follow the steps on the next pages to assemble your new tall boy. Tall boy x 1 Leg x 4 Hardware What you need A x 8 B x 8 C x 8...
Page 3
Align a leg to the underside of the tall boy Step 1 that the screw holes are overlapping. Fit a washer to a bolt and screw into a hole and repeat for the other bolt to secure the leg in place. Repeat process for the remaining legs and use the allen key tighten all of the bolts (A).
Page 4
Align a strap to the back of the tall boy and secure Step 3 in place with a screw (F). F x 1 H x 1 At the location where the tall boy will be placed, Step 4 mark out two holes along the wall where you’ll secure the straps.
Page 5
e tall boy is 70cm wide by 113cm high and 47cm Step 5 deep and can take up to 60kg maximum weight on top and 5kg inside each draw. Enjoy your new tallboy! 60KG...
Need help?
Do you have a question about the Parc Tall Boy and is the answer not in the manual?
Questions and answers