Table of Contents
Advertisement
| Installing the Switch
C
3
HAPTER
Mounting
M
OUNTING
The switch can be mounted in a standard 19-inch equipment rack or on a
desktop or shelf. Mounting instructions for each type of site follow.
R
-M
ACK
OUNTING
Before rack mounting the switch, pay particular attention to the following
factors:
Temperature: Since the temperature within a rack assembly may be higher
◆
than the ambient room temperature, check that the rack-environment
temperature is within the specified operating temperature range.
Characteristics" on page
Mechanical Loading: Do not place any equipment on top of the rack-
◆
mounted unit.
Circuit Overloading: Be sure that the supply circuit to the rack assembly is
◆
not overloaded.
54.)
– 39 –
("Physical
Advertisement
Table of Contents
