Equipment Checklist; Package Contents; Optional Rack-Mounting Equipment; Figure 3-1 Rj-45 Connections - Edge-Core ES3510 Installation Manual

10-port fast ethernet switch

Hide thumbs Also See for ES3510:

Table of Contents

Installing the Switch

Equipment Checklist

After unpacking this switch, check the contents to be sure you have received all the

components. Then, before beginning the installation, be sure you have all other

necessary installation equipment.

• Fast Ethernet Switch (ES3510)

• Four adhesive foot pads

• Bracket Mounting Kit containing two brackets and eight screws for attaching the

brackets to the switch

• Power Cord—either US, Continental Europe or UK

• RS-232 console cable

• This Installation Guide

• Management Guide CD

If you plan to rack-mount the switch, be sure to have the following equipment

available:

• Four mounting screws for each device you plan to install in a rack—these are not

included

• A screwdriver (Phillips or flathead, depending on the type of screws used)

3-2

RJ-45 Connector

Table of Contents