T2M7Xk1(D) Configuration; Access Controller Position Chart For The Following Models - Altronix TROVE plus T2M7XK1 Installation Manual

1. Position access controller module over corresponding spacers and depress onto snap on spacers (Fig. 2, pg. 3).
2. Mount backplane to enclosure with hardware.

Access Controller Position Chart for the Following Models:

LenelS2 / Mercury Access Controller
LNL-2220 / LP1502
LNL-1320 / MR52
Fig. 2
Altronix eFlow104NB
L G N
PWR1 +
PWR2 +
Altronix
ACMS8(CB)
VR6 under ACMS8(CB)
Altronix PDS8(CB)
(B) LNL-1320,
MR52
IN1 IN2 IN3 IN4 IN5 IN6 IN7 IN8
INPUTS
T2M7XK1(D) Installation Guide

T2M7XK1(D) Configuration:

AC1 AC DC
1 min enable
NC C NO NC C NO TRIGGER EOL NO GND
2 hr disable + AUX -
SUPERVISED
AC FAIL BAT FAIL RESET
PWR1 +
PWR2 +
PN
REV
SN
RS-485 12V
(A) LNL-2220,
LP1502
(B) LNL-1320,
MR52
PN
IN1 IN2 IN3 IN4 IN5 IN6 IN7 IN8 REV
SN
INPUTS
(B) LNL-1320,
MR52
PN
IN1 IN2 IN3 IN4 IN5 IN6 IN7 IN8 REV
SN
INPUTS
Pem Mounting
A
B
RS-485 12V
RS-485 12V
- 3 -