CIP Training C7200 series
CIP Training Pro C9200 series
Adjustment Settings for Operators
Adjustment Settings for Operators
0605 Paper Alignment for Stapling: With Feed
Adjust the Tip Stopper movement when using the staple function applied at an angle
on Finisher SR5050 or Booklet Finisher SR5060.
Use the function to reduce the dispersion of paper orientation in the feeding
direction due to paper size, thickness, curl and so on.
Press [ + ] or [ - ] to increase or decrease the amount of movement.
Setting Items
A3 SEF
B4 JIS SEF
A4 LEF
A4 SEF
B5 JIS LEF
B5 JIS SEF
11 × 17 SEF
1
8
/
× 14 SEF
2
1
8
/
× 11 LEF
2
1
8
/
× 11 SEF
2
8K SEF
16K LEF
16K SEF
Other Paper Sizes
0606 Number of Sheets Align for Stapling
Specify the number of sheets to align for stapling at one time.
If too many sheets are delivered to the shift unit, the stacked sheets may not be
correctly aligned due to the paper type and paper condition.
If that happens, adjust the setting to the optimal value for the paper you are using.
When the number is less, it takes more time to align and productivity may fall.
Default
Max.
Min.
Value
Value
Value
0.0
2.5
-2.5
Step
Unit
0.1
mm