0612 Paper Alignment In Shift Tray: Across Feed; 0613 Output Tray Descending Position - Ricoh Pro C9200 Series Cip Training

CIP Training C7200 series CIP Training Pro C9200 series
Adjustment Settings for Operators Adjustment Settings for Operators

0612 Paper Alignment in Shift Tray: Across Feed

Adjust the width of Paper Alignment Jogger
ejected and delivered to the Shift Tray of Finisher SR5050 or Booklet Finisher SR5060.
Use the function to reduce the dispersion of paper orientation at a right angle due to
paper size, thickness, curl and so on.
Press [ + ] or [ - ] to increase or decrease the width.
Setting Items
A3 SEF
B4 JIS SEF
A4 LEF
A4 SEF
B5 JIS LEF
B5 JIS SEF
A5 LEF
A5 SEF
11 × 17 SEF
1
8 / × 14 SEF
2
1
8 / × 11 LEF
2
1
8 / × 11 SEF
2
1 1
5 / × 8 / LEF
2 2
1 1
5 / × 8 / SEF
2 2
Other Paper Sizes
*1 A guide for aligning output sheets when using the shift function. The guide is located inside the
finisher.

0613 Output Tray Descending Position

Specify the tray descent range according to the paper weight when sheets are
ejected and delivered to the Shift Tray of Finisher SR5050 or Booklet Finisher SR5060.
The machine lowers the Paper Exit Guide each time it ejects stapled sheets. If the
descent range is not appropriate for the paper weight, it may cause the paper to be
improperly ejected or a diversion of sheets on the tray. Select the descent range
appropriate for the paper you are using.
Setting Items
Setting
*1
on the Shift Tray when sheets are
Default Max. Min.
Value Value Value
0.0 1.0 -1.0
Values
Paper Weight 1
Paper Weight 2
Paper Weight 3-8
Step Unit
0.1 mm
Default Value
Paper Weight 1