Ricoh L5160 Cip Training page 8

CIP Training L5160/L5130
Setting Media
9. Lock the roll holder's holding lever.
Lock the holding lever with the roll holder pressed thoroughly into the roll
core. If the amount of force used to press the roll holder into the roll core is
insufficient, the media may hang down and touch the floor.
10. Return the roll feed unit to its original position.
11. Lift and secure the pre-heater cover.
12. Raise the media holding lever (back).
13. Insert the tip of the media between the feed rollers and pinch rollers.
DWT129
DWT130
DWT131
DWT132