Advertisement
CIP Training L5160/L5130
Setting Media
19. While holding down the center of the media, lower the media holding lever (front). The
pinch rollers lower and the media is fixed.
Since the pinch rollers may stop half way because of the shock-absorbing stopper, make sure
the media holding lever is lowered completely.
20. Move the left and right media guides to match the media width.
• Set the media so that it passes under the media guides.
• When setting the media that is thicker than the media guides, maximally widen the
space between the media guides.
• If media rises on the platen, hold it down while setting the media guides.
• If the positions of the media guides do not match the media width, the media may be
fed diagonally or misfed.
21. Close the center cover.
When media is set correctly, a confirmation screen is displayed on the control panel.
22. Set the roll-up switch to the off position (middle).
DWT137
DWT136
DWT138
Advertisement
