Ricoh L5160 Cip Training page 12

CIP Training L5160/L5130
Setting Media
23. Move to the rear of the printer and check for warping in the
media. If the roll media is slack, rotate it to take up the slack.
• Slack
If the media's slack is uneven, return to Step 11 and try loading the media again.
24. Insert an empty roll core onto the roll core holder on the right side of the front of the machine.
Insert the roll core as far as possible so that it does not move.
25. Release the roll core holder's holding lever on the left side of the front of the machine.
If necessary, move the roll core holder to match the width of the empty roll core.
2
1
26. Move the roll core holder to the right to insert it into the empty roll core.
Insert the roll core as far as possible so that it does not move.
• Slack eliminated
EDP010
DWT139
DWT140
EDP011