Boot Configuration - Contec PT-M21WB-2500 Series Reference Manual

7.Boot Configuration

Configurate the settings boot devices and other devices
PCH-IO Configuration
Item
Setup Prompt Timeout
Bootup NumLock State
Quiet Boot
Boot Option #1
Boot Option #2
Fast Boot
In the Boot Option #x device list, the same device may be displayed as follows.
⚫
USB Disk
UEFI: USB Disk
In such cases, if (1) is selected, a legacy boot is performed under the assumption the disk is
MBR-formatted. If (2) is selected, a UEFI boot is performed under the assumption the disk is
GPT-formatted. Make sure to specify (1) as the boot setting. Booting with (2) will result in non-
support. Only devices set as the highest in individual settings like CD/DVD ROM Drive BBS
Priorities are listed as selectable under Boot Option #x.
—
BIOS Setup
PT-M21WB-2500 Series Reference Manual
Options
1
On
Off
Enabled
Disabled
UEFI: Built-in EFI Shell
Windows Boot Manager
Disabled
UEFI: Built-in EFI Shell
Windows Boot Manager
Disabled
Enabled
Disable Link
CAUTION
- 64 -
—
Description
Set the standby time for BIOS Setup <DEL>
or <F2> input.
Unit : [second]
Set the NumLock status when the system
starts.
Do not change this setting.
Set the system boot order.
Set the system boot order.
Do not change this setting.