Replacing Fuse; Replacing Light Bulb - Kubota B1620 Operator's Manual

Hide thumbs Also See for B1620:
Table of Contents

Advertisement

66
PERIODIC SERVICE
BReplacing Fuse
The tractor electrical system is protected from potential
damage by fuses.
A blown fuse indicates that there is an overload or short
somewhere in the electrical system.
If any of the fuses should blow, replace with a new one of
the same capacity.
A Before replacing a blown fuse, determine why the fuse
blew and make any necessary repairs. Failure to
follow this procedure may result in serious damage to
the
tractor
electrical
"TROUBLESHOOTING" section of this manual or your
local KUBOTA Dealer for specific information dealing
with electrical problems.
system.
Refer
to
the
C Protected circuit
FUSE
CAPACITY
No.
(A)
(1)
15 A
Key stop
(2)
15 A
Hazard
(3)
20 A
Head light, Horn, Key stop
(4)
10 A
Brake
(5)
15 A
Auxiliary (Reserve)
(6)
10 A
Instrument cluster
Slow blow fuse
Check circuit against wrong battery
(7)
50 A
connection
BReplacing Light Bulb
1. Head lights.
Take the bulb out of the light body and replace with a
new one.
2. Other lights
Detach the lens and replace the bulb.
Light
Head light
Tail light / Brake stop light
Turn signal / hazard light
Instrument panel light
Hazard light switch indicator
Work light
Front position light
Number plate light
Protected circuit
Capacity
H8 - 35 W
5 W / 21 W
21 W
1.7 W
0.6 W
---
5 W
5 W

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

B1820

Table of Contents