12
OPERATING THE ENGINE
3. Place the PTO gear shift lever in
"NEUTRAL" position.
(1) PTO gear shift lever
A The PTO gear shift lever shifts to the (A) position only
when the PTO restricting plate is in "RELEASE"
position.
4. Place the main gear shift lever in
"NEUTRAL" position.
(1) Main gear shift lever
(A) Rear PTO "2nd"
Mid PTO "ON"
(B) Rear PTO "1st"
Mid PTO "OFF"
(N) "NEUTRALPOSITION"
(N) "NEUTRAL POSITION"
5. Place the hydraulic control lever in
"DOWN" position.
(1) Hydraulic control lever
6. Set the throttle lever to about 1/2 way.
(1) Hand throttle lever
(A) "DOWN"
"INCREASE"
"DECREASE"