Implement Limitations - Kubota B1620 Operator's Manual

IMPLEMENT LIMITATIONS

The KUBOTA Tractor has been thoroughly tested for
proper performance with implements sold or approved by
KUBOTA. Use with implements which are not sold or
approved by KUBOTA and which exceed the maximum
specifications listed below, or which are otherwise unfit for
use with the KUBOTA Tractor may result in malfunctions
or failures of the tractor, damage to other property and
injury to the operator or others. [Any malfunctions or
failures of the tractor resulting from use with improper
implements are not covered by the warranty.]
B Front Loader [LA213]
C Fixation points on the body of the tractor where
the front loader must be installed.
[Attach the Main Frame]
(1) Main frame
(2) 4-M14 x 60 bolts
4-M14 spring washers
4-M14 plain washers
(3) 4-M12 x 45 sems bolts
4-M12 plain washers
(4) 4-M12 x 55 bolts
4-M12 nuts
4-M12 spring washers
4-M12 plain washers
Tightening torque: 90.1 N-m (9.2 kgf-m) (M12)
147 N-m (15.0 kgf-m) (M14)
IMPLEMENT LIMITATIONS
[Attach the Sub Frame]
(1) Sub frame
(2) 4-M12 x 50 bolts
C OUTPUT CAPACITY
Max. Lifting Capacity
(bucket pivot pin, MAX. Height):
Max. Oil Pressure 13.0 MPa (133 kgf/cm )
A The value of MAX. Lifting capacity contains the weight
of KUBOTA standard bucket.
To avoid personal injury:
A Special attention should be made when lifting
the load, keep the bucket correctly positioned
to prevent spillages.
A Not all risks are listed.
Refer to front loader operator's manual.
5
302 kg