Ballast; Front Ballast - Kubota B1620 Operator's Manual

42 TIRES, WHEELS AND BALLAST
To avoid personal injury:
A Before jacking up the tractor, park it on a firm
and level ground and chock the front wheels.
A Fix the front axle to keep it from swinging.
A Select jacks that withstand the machine weight
and set them up as shown below.
(1) Jack point

BALLAST

To avoid personal injury:
A Additional ballast
transporting heavy implements. When the
implement is raised, drive slowly over rough
ground, regardless of how much ballast is
used.
A Do not fill the front wheels with liquid.
BFront Ballast
Add weights if needed for stability and improving traction.
Heavy pulling and heavy rear mounted implements tend
to lift front wheels. Add enough ballast to maintain
steering control and prevent tip over.
Remove weight when no longer needed.
C Front End Weights (option)
The front end weights can be attached to the bumper.
See your implement operator's manual for required
number of weights or consult your local KUBOTA Dealer
to use.
A Besides the weight, a mounting kit is also required.
(1) Front end weights
(2) Bumper
A Do not overload tires.
A Add no more weight than indicated in chart.
Maximum weight
will be needed for
25 kg x 3 pieces