Table of Contents
Advertisement
ST-37 Instruction Manual
Plus
I. Description
The ST-37 temperature regulator is used for controlling the water circulation
pump, hot consumption water pump, blow (fan) and fuel feeder.
If the furnace temperature is lower than the setpoint temperature, the
regulator is operated in its duty cycle, i.e. the blow is active and the
operation time of the fuel feeder is set by the user (both operation and
stand-by time is set).
If the furnace temperature is equal to or higher than the setpoint
temperature, the regulator is operated in its sustain cycle.
In
each
case,
manufacturer's requirements. Please send all comments on the software to
the boiler manufacturer.
Your controller should be set according to your individual needs, depending on
the type of fuel and boiler used. TECH shall not be held responsible for
incorrect settings.
- 4 -
Minus
Enter submenu,
the
software
confirm
menu, resetting
version
is
customized
Consumption
Water Pump
Return from
to
Alarm
Feeder
Blow
Central
Heating
Pump
Hot
the
furnace
Advertisement
Table of Contents
