Table of Contents
Advertisement
No. Specification
1
Power Supply
2
Power Consumption
3
Ambient Temperature
4
Feeder Output Load
5
Circulation Pump Output Load
6
Fan Output Load
7
Temperature Measurement Range
8
Measurement Accuracy
9
Temperature Adjustment Range
10
Sensor Thermal Resistance
11
Fuse Insert
We are committed to protecting the environment. Manufacturing electronic devices imposes
an obligation of providing for environmentally safe disposal of used electronic components
and devices. Hence, we have been entered into a register kept by the Inspection For
Environmental Protection. The crossed-out bin symbol on a product means that the product
may not be disposed of to household waste containers. Recycling of wastes helps to protect
the environment. The user is obliged to transfer their used equipment to a collection point
where all electric and electronic components will be recycled.
V. Assembly
ATTENTION: all assembly works must only be carried out by qualified
persons. During assembly, the device must be disconnected (make sure the
power cord is unplugged)!
ATTENTION:
improper cable connection may damage the regulator!
ATTENTION:
the ST-37 controller must be built into the boiler so that the
cable connection strips are not accessible.
The regulator may not be operated in a closed-circuit central heating system.
It is necessary to provide for safety valves, pressure valves and a surge tank
in order to prevent water from boiling in the central heating system.
Unit
V
230V/50Hz +/-10%
W
4
°C
1.10.1950
A
2,5
A
1
A
1
°C
0-85
°C
1
°C
40-80
°C
-25;90
A
6,3
TECH
- 21 -
Advertisement
Table of Contents
