Table of Contents
Advertisement
II. Regulator Functionality
This chapter describes regulator functionality, how to change settings and
navigate in the menu.
II.a) Main Page
During normal operation, the LCD display shows the main page with the
following data:
Boiler temperature
Setpoint temperature
With the display, you can instantly change the setpoint temperature with
PLUS and MINUS. Pressing OPTIONS will move you to the first level. The
display shows the first two lines of the menu. To navigate in each menu, use
PLUS and MINUS. Pressing OPTIONS will move you to the next submenu or
will enable an option. Pressing EXIT will move you to the home menu. When
the main page is displayed, pressing (and holding) EXIT will inform you
whether the hot consumption water pump is on or off.
II.b) Manual Mode
22
o
c
C.H.
For your convenience, the regulator has a manual mode module. In this
mode, each individual element is enabled and disabled independently of the
other.
22
C.H.
56
o
c
Manual Mode
ON
Feed Time
o
c
56
o
ON
c
Feeder
BLOW
TECH
- 5 -
Advertisement
Table of Contents
